Streamline Pro™ MultiCal™ System
The Streamline Pro™ MultiCal™ System provides a comprehensive approach to quality assurance of data generated by ambient air monitors and samplers. It is a portable battery operated device with internal data storage and can display test/calibration data directly on the screen. The unit provides direct readings of NIST traceable flow, temperature and barometric (ambient) pressure data. Remote (external) temperature probes (RT probes) allow NIST traceable temperature measurements.
Streamline Pro™ is the first portable integrated system that allows temperature measurements from ruggedized RT probes to be used in flow calculations for increased efficiency and operator convenience.
The Streamline Pro™ is designed and calibrated for complete interchangeability of all components. Calibration constants and qualification data for each element are stored in the element's built-in memory. Calibration data is automatically uploaded to the Control Unit (CU) where it can be displayed and recorded for QA monitoring. Any measuring unit (MU) can be used with any CU, as can any remote temperature (RT) sensor. This increases user flexibility as another MU calibrated at a different flow range can be added to the kit if additional needs arise in the future.
When calibrating the Streamline Pro™ under laboratory conditions, the patented orifice element in the MU provides a calibration relationship based on a specific geometry under laboratory conditions. Made of durable, patented materials, its geometry, performance and calibration do not change with changes in temperature, humidity or air pressure. Other flow measurement devices may expand, contract, or distort when used under conditions other than those for which they are calibrated to provide unreliable flow measurements away from the laboratory. This situation is worse when the flow measurement device is based on polymers, metals or combination materials with high and/or variable thermal expansion characteristics.
The Streamline Pro™ is a durable and accurate orifice flow transfer model with no moving parts or pistons that introduce shock waves or pulses into the gas flow. It can work in any position because it doesn't use bubbles or other components that depend on gravity or position. There is no vacuum tubing to twist or tangle between MU and CU.
Streamline Pro™ is highly portable and intuitive to use. The entire kit fits into the 14" x 11" x 4" padded carrying case and weighs only 4 lbs. The menu is easy to navigate and the functions are designed for quick and easy access even when wearing gloves!
Streamline Pro Spec Sheet[PDF]
type M
Model M is the original Streamline Pro™. It has a calibrated flow range of 0.9 - 19 lpm for all TEOM configurations.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT sensor calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
Type M Specifications: Type M Spec Sheet[PDF]
- Calibrated flow range: 0.9 – 19 lpm
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal pressure drop at orifice: 30" w.c. @ 16.7 lpm, 22°C, 1 atm
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
model
The Streamline Pro™ MultiCal™ System Model S was developed as a low pressure drop unit for Beta decay monitors. This lower pressure drop is achieved by changing the orifice size. However, the larger orifice limits the lower end of the flow range and extends the upper end, so it is rated at 2 – 20 lpm.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT Probe calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
S-Type Specifications: Model S spec sheet[PDF]
- Calibrated flow range: 2 – 20 lpm
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal pressure drop at orifice: 16" w.c. @ 16.7 lpm, 22°C, 1 atm
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
type SX
The Streamline Pro™ MultiCal™ System Model S was developed as a low pressure drop unit for Beta decay monitors. This lower pressure drop is achieved by changing the orifice size. However, the larger orifice limits the lower end of the flow range and extends the upper end, so it is rated at 2 – 20 lpm. The Model SX is a Model S accessory calibrated in the 2 - 25 lpm flow range to include the 22 lpm target on the US Coal Sampling Network.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT Probe calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
SX Type Specifications: SX Type Spec Sheet[PDF]
- Calibrated flow range: 2 – 25 lpm
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal pressure drop at orifice: 16" w.c. @ 16.7 lpm, 22°C, 1 atm
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
type H
The Streamline Pro™ MultiCal™ Model H system was originally designed to meet the needs of the European market with a flow range of 4.5 - 55 lpm. It also meets the 22 lpm target on the US Coal Sampling Network. The Model H is used as a low pressure drop device with target flows of 16.7 and 22 lpm and is often calibrated in the 5 – 30 lpm flow range.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT Probe calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
H-Type Specifications: Type H specification sheet[PDF]
- Calibrated flow range: 4.5 – 50 lpm possible, often calibrated 5 – 30 lpm
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal pressure drop at orifice: 3" w.c. @ 16.7 lpm, 22°C, 1 atm
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
Model HL
The Streamline Pro™ MultiCal™ Model HL system is designed to meet the niche low pressure drop market in the 3 - 30 lpm flow range. It covers a TEOM main flow of 3 lpm, a bypass flow of 13.67 lpm, a total flow of 16.67 lpm, and a target flow of 22 lpm in the US coal sampling network. The HL model can be calibrated in a flow range of 3 – 25 or 30 lpm.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT Probe calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
HL Model Specifications: HL model spec sheet[PDF]
- Rated flow range: 3 – 30 lpm likely, 3 – 25 lpm often
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal Orifice Pressure Drop: 6" w.c. @ 16.7 lpm, 22°C, 1 atm
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
type LX
The Streamline Pro™ MultiCal™ Model LX system is designed to meet the low flow niche market in the 0.5 - 7 lpm flow range with moderate pressure drop across the flow orifice.
feature:
- Synchronized NIST traceable flow, temperature and pressure measurements with continuous value display.
- User selectable flow, temperature and pressure units.
- Interchangeable - CU, MU and RT detectors are freely interchangeable between kits while maintaining NIST calibration and traceability.
- A user-selectable option to measure with the RT Probe during flow calculation extends the operating range of the device and reduces the time required for each measurement.
- MU and RT Probe calibration data are automatically uploaded to the CU and can be displayed and recorded for quality assurance monitoring.
- Internally records up to 45 data sets. Operates on battery or optional AC adapter.
- Mounts directly to 1-1/4" sample tubing or with optional universal flow adapter.
LX Model Specifications: Model LX spec sheet[PDF]
- Calibrated flow range: 0.5 – 7 lpm
- Operating temperature: -30 °C to +55 °C, extendable with USE_RT firmware function
- Working pressure: 0.6 to 1.1 atmospheres
- Nominal Orifice Pressure Drop: 1" w.c. @ 1.7 lpm, 22°C, 1 atmosphere
- Flow measurement uncertainty:
- Room temperature (22 °C): ± 0.6 % of full scale
- Over full operating range: ±1.2% of full scale
- Temperature measurement uncertainty: ±0.2% of full scale
- Pressure measurement uncertainty: ±0.4% of full scale
Kit Components:
- Control Unit (CU)
- unit of measurement (MU)
- MU-CU communication cable
- Remote Temperature Probe (RT Probe)
- shielding from solar radiation
- padded suitcase
- Batteries (2 - AA 1.5V)
- Calibration certificate
- Manual
Custom units of measure
The MU Streamline Pro™ MultiCal™ system can be customized and calibrated to meet many unique flow measurement applications.Contact Chinook Engineering for information.
accessory
LOGCOMM™ data logging software
The Streamline Pro™ MultiCal™ system has an optional LogComm™ software package that can be used to extend the utility of the instrument. LogComm™ software runs on a PC with enhanced data capture, viewing and acquisition capabilities.
LogComm™ software allows users to:
- See continuously updated graphs of flow, air pressure and outside temperature
- Save the diagrams to the computer for later viewing
- Record data for a period of time or until the user stops the experiment
- Create and view data files compatible with Microsoft® Excel®
- Retrieve data stored and recorded in the control unit
- View system calibration information
- set the system clock
1-1/4" Flow Adapter Kit
Streamline™ FTS products are designed to fit directly onto 1-1/4" OD sampler inlet tubing. Chinook recognizes that some flow measurements require different connections, so a 1-1/4" FTS adapter kit is available as an optional accessory . The kit includes a Delrin adapter for the 1-1/4" outlet side of the FTS, a clamp and 3 feet of tubing. The Delrin adapter has a ¼" outlet fitting with pins. The tube is connected between the adapter and a user-supplied fitting suitable for the sampler inlet.
AC-DC power converter
The Universal AC/DC Power Converter is a wall or benchtop transformer with a nominal 90-246 AC input and 5 volt DC output.